Composition: 80%polyester and 20%Ployamide
Weight: 200-400gsm or customized
Packing: Opp Bag
Microfiber car wash towel has extremely fineness, which greatly reduces the stiffness of the wire. The fabric feels extremely soft, and the fine fiber can increase the layered structure of the wire, increase the specific surface area and capillary effect, and distribute the reflected light inside the fiber on the surface. It is more delicate, making it silky and elegant, and has good moisture absorption and moisture permeability. Made of microfiber, it is comfortable, beautiful, warm, breathable, has good drape and fullness, and has obvious improvement in hydrophobicity and antifouling properties. It can be designed with different specific surface structure due to its large specific surface area and softness. More absorption of sunlight heat or faster loss of body temperature plays a role in warm winter and cool summer.
(1) High water absorption: The microfiber adopts the orange-petal technique to divide the filament into eight lobes, so that the surface area of the fiber is increased, the pores in the fabric are increased, and the water absorbing effect is enhanced by the capillary wicking effect. Rapid water absorption and rapid drying become its remarkable characteristics.
(2) Strong decontamination: The fineness of microfibers with a diameter of 0.4μm is only 1/10 of that of silk. Its special cross section can capture dust particles as small as a few microns more effectively. Decontamination and oil removal are very effective. .
(3) No hair removal: high-strength synthetic fiber filaments are not easy to break, and at the same time, the fine weaving method is adopted, no spinning, no stripping, and the fibers are not easily peeled off from the towel surface. It is used to make wipes and wipes. It is especially suitable for wiping bright paint surfaces, plating surfaces, glass, instruments and LCD screens. It can clean the glass during the process of car filming, which can achieve very ideal film effect.
(4) Long life: Due to the high strength and toughness of the microfiber, its service life is more than 4 times that of the ordinary towel. It is still invariable after repeated washing. At the same time, the polymer fiber is not like cotton fiber. In this way, protein hydrolysis occurs, and even if it is not dried after use, it will not be moldy, rot, and has a long life.
(5) Easy to clean: When using ordinary towels, especially natural fiber towels, the dust, grease, dirt, etc. on the surface of the object will be directly absorbed into the fiber. After use, it will remain in the fiber and will not be easily removed. After the time, it will even become hard and lose its elasticity, which will affect the use. The microfiber towel absorbs the dirt between the fibers (instead of the inside of the fiber), and the fiber has a high fiber density and a high density, so the adsorption capacity is strong, and it is only necessary to clean with water or a little detergent after use.
(6) It does not fade: the dyeing process uses TF-215 dyeing agent for microfiber materials, and its retarding, transferability, high-temperature dispersibility, and decolorization index all meet the strict standards of export international market, especially Its advantage of not fading, so that it does not bring the trouble of decolorization pollution at the time of cleaning the surface of the article.